Tools for the processing of ETFE, PTFE and Teflon

• Weld cooling via trimmer beam mechanism
• Welder terminal area 55 x 400 / 100 x 630 / max. 100 x 1000mm
• Available as a mobile and as a stationary version and with various working heights
• Brass heating bars with controls for welding time, cooling time and welding temperature
  
  

• Torsion-proof machine frame
• Heating bar length 2m (1.8m usable welding length)
• Heating bar heated at the top and the bottom (12kW installed heating power)
• Heating divided into six heating and control zones
• Bearing options for textiles
• Press accessible inside and outside for positioning the textiles
• Max. pressing power 2.2 tons at 7-bar compressed-air supply
• Press equipped with mobile mode
• On request, this press is also available without cooling technology

• Welding area: 1000 x 100 mm
• Working temperature: 380°C
• Equipped with electronic thermostat and timer
• Available as stationary version or mobile on wheels
• Higher working heights are available on request
• Heating power 8kW

• Easy handling and operation
• Welding temperatures up to 390°C
• Widely projecting C frame, making it suitable for large film structures
• Equipped with motor-driven castors

• Ergonomic handle
• Heat-insulated handle
• Good wear characteristics
• Dimensions and heat output according to client’s specifications
• With controller up to 450°C, power regulator
• Mains supply (230V) for welding temperature of approx. 350°C
• Storable spare parts

 Technical data:

Welding area: 600 x 100m with timer and thermostat and convection guard.  
 
Can be used in production or in light construction on the building site. We manufacture welding tools in various dimensions and control engineering – in line with your wishes.
 

Compensator construction
We also supply standard welding equipment with the dimensions: 300 x 55mm welding area and 680 x 100mm welding area, round, square and angular, up to 3m in length.

Mobile welding press for use on the building site. Suitable for repairing stressed tent constructions or, suspended from a crane, it can also be used in shop fabrication.

Advantages:
No need for inconvenient film handling, since no machine frame restricts the range of action.

• Brass heating bars, welding area 350 x 75mm (max. welding area 1000 x 100m possible)
• Welding temperature up to 390°C
• Welding time and temperature are electronically controlled
• Pressing power is the same as that of the stationary welding presses